Odd Tvedt & Co A/s

Times Microwave Systems announces its Times-Protect Lightning Protection Products for RF Communication Networks

These unique surge protection devices address applications from DC to 3000 MHz. Current products available include:

LP-BTR Series:
* 125 MHz - 1000 MHz
* DC blocking technology
* Exceptional longevity
* Excellent multi-strike performance
* Outstanding IL/RL characteristics
* Superior surge performance

LP-STR Series:
* 800 MHz - 2500 MHz (DIN and N)
* Excellent PIM performance
* Outstanding IL/RL characteristics
* DC blocked
* High surge current rating
* Broadband multi-strike design
* High power
* Fully weatherized housing to IP67

LP-GTR Series:
* DC - 3000 MHz (DIN and N)
* DC pass, multi-strike capability
* Replaceable gas tube design
* Broadband bidirectional performance
* Excellent IL/RL performance
* Fully weatherized housing to IP67


Times'knowledge base and application engineering support in the area of lightning protection and grounding is unsurpassed. These innovative devices offer equal or lower insertion loss, return loss and let-through energy and equal or better PIM performance than the here-to-for leading industry brand and all at a lower cost.

www.timesmicrowave.com

Eudyna Devices skifter navn til Sumitomo Electric Device Innovations.

www.sedi.co.jp

These units are optimized for 300 PIN MSA Transponders and cover:

• SFF VSR Applications
• DPSK and ODB Long Reach applications
• DQPSK Requirements at 40 and 100 Gb/s

Narda's new driver products utilize proprietary GaAs MMIC technology and provide broader bandwidth with the critical electrical/optical performance needed for emerging modulation formats,  including DSPK and DQPSK.  Our innovations in performance and packaging yield the cost effectiveness so necessary in meeting the strict financial targets inherent in the optical communications industry.

www.nardamicrowave.com

The new TuffGrip®-CI (changeable interface) test cable, is the next generation of our patented SilverLine TuffGrip® armored phase stable test leads for use with Anritsu SiteMasterTM and other portable analyzers for cell site RF testing.

TuffGrip®-CI employs a Type N female interface which can be quickly converted to a Type N male, 7-16 male or 7-16 female interface simply by attaching one of the new, unique Times PTNTM interface mini-Grip adaptors. These robust RF adaptors are designed and built for long life and are capable of excellent VSWR performance to 18 GHz (6 GHz for 7-16 interface). Precision-made from stainless steel, each PTNTM interface mini-Grip adaptor is equipped with its own mini-TuffGrip, a flexible, rugged lanyard and also features the Times OneTurnTM fast mating system for fast on, fast off operation.

A TuffGrip®-CI test lead with mated interface is about the same length as a standard, fixed head TuffGrip® test lead and exhibits the same VSWR: 1.25:1 max DC- 6 GHz and 1.35:1 max DC-18 GHz. TuffGrip®-CI comes as a complete kit with either a 1.5, 3 or 5 meter test lead, the three Times PTNTM interface mini- Grip adaptors and one PTN female adaptor that allows the three changeable interfaces to be mated "back-to-back" for use as a separate precision, high performance adaptor. (Adaptor kits are also available individually.)

www.timesmicrowave.com

A new frequency-selective measuring set for environmental and safety measurements in electromagnetic fields. With its isotropic (non-directional) measuring antennas, covering the entire frequency range from 9 kHz to 6 GHz. For safety investigations in the near field range of long wave trans- mitters, through measurements on radio and TV broadcasters (DVB-T) and right up to exposure level measurements on the latest gener- ation of mobile communications services like EDGE, WiFi or WiMAX.

Complete, compact measuring system
- For outdoor use
- Battery operated
- In-situ battery replacement

Measuring antennas from 9 kHz to 6 GHz
- Isotropic measurement
- Direct display of results
- Standard-compliant evaluation, e.g. for the determination of exposure according to IEC 62232 or EN 50492

PC software
- Measurement preparation
- Result management
- Customized test reports

SRM: WHEN SAFETY COUNTS

www.srm3006.com

Narda East have introduced Model 3306-2, a two-way power divider that handles up to 100 W CW from 6 to 18 GHz into a 1.5:1 VSWR and meets military requirements, making it an excellent choice for a wide array of aerospace and defense as well as commercial applications.

The Model 3306-2 is extremely compact considering its high RF power handling ability, measuring only 1.25 x 1.5 x 1.2 in. without connectors, which are Type-N female. It has insertion loss of less than 4.2 dB from 6 to 10 GHz and 4.5 dB from 10 to 18 GHz, isolation of at least 15 dB, and input and output VSWR of less than 1.8:1 at all ports. Amplitude balance is maintained to 0.5 dB or less and phase balance is maintained to 12 deg. or less. The power divider has an operating temperature range of -54o C to +85o C.

The Model 3306-2 power divider is available for immediate delivery.

www.nardamicrowave.com/east

Measuring electric fields from 100 kHz to 6 GHz using instruments in the NBM-500 family.
- Field exposure from broadcasting, telecoms and industrial equipment
- Compliant with EN 50492 (base stations)
- Isotropic (non-directional) measurement
- 65 dB dynamic without changing range
- High sensitivity starting at 0.35 V/m

The probe contains three orthogonally arranged dipoles with detector diodes. The three voltages, corresponding to the spatial components, are available individually at the probe output. The NBM basic unit calculates the resulting isotropic field strength.

APPLICATIONS
The probe detects electric fields from 100 kHz to 6 GHz, covering the fields that occur in broadcasting, telecoms, and industry. The high sensitivity of 0.35 V/m and wide frequency range make it ideal for new WLAN applications. For measurements on mobile phone base stations the probe complies with the latest basic standard EN 50492 exceeding its requirements.

PROPERTIES
The probe is designed with mechanical and electrical properties ideal for field use. The probe head is made of foam material to provide effective protection for the sensors, while having excellent RF characteristics.

www.narda-sts.com

Times har gjort instruksjonsvidene sine tilgjengelig på YouTube.

Times recently introduced a new series of improved watertight end caps for use with the popular series of LMR Bundled Cables. These end caps are constructed with a heavy duty ABS plastic shell along with a 100% silicone rubber gasket and cushion. Independently tested and easy to install, these rugged end caps are available in three configurations:

* EC-BC400-7B
* EC-BC400-9B
* EC-BC240-12B

Features and benefits:
- Rugged UV/sunlight resistant design
- Independently certified to IP-68 for water ingress
- Quick and easy installation with just an Allen wrench

Times recently introduced the CST-400 (3192-004) All-In-One Combination Prep Tool for use with LMR-400 low loss coaxial cables including standard LMR, DB, FR, PVC, LLPL & -75 and can also be used for the first strip step on LMR-400-Ultraflex. The new tool provides the following features and advantages:

- Combination feature allows preparation of LMR-400 cables for either crimp or clamp connector attachment
- Suitable for use with virtually all LMR-400 connectors
- Provides consistently sharp cut of dielectric for best VSWR performance
- Includes a built-In debur tool eliminating the need for a separate debur tool
- Rugged, lightweight construction

The CST-400 (3192-004) All-In-One Combination Prep Tool obsoletes the ST-400-EZ and ST-400C prep tools.

Times Microwave har nylig introdusert en ny lavtaps kabel LMR-400-UltraFlex-FR. Denne kombinerer fleksibiliteten til UltraFlex kablene med de brannhemmende egenskapene til FR kablene.

Kablene har en flettet kjerne som bidrar med fleksibilitet. Kappen består av polyetylen, noe som gjør den brannhemmende. På tross av disse egenskapene har den knapt noen økning i tapene pr. meter i forhold til standard LMR400 kabel.

Kabelen vil våre være kompatibel med alle standard LMR-type konnektorer.

Kabelen er nå tilgjengelig for bestilling med stock code 54270.

Narda MW East har introdusert en rimelig driver for VSR transpondere med model #10229.

Narda vil være tilstede på ECOC 2008 i Brussel, Belgia. Du finner dem ved stand #354.

På utstillingen vil de i tillegg til den allerede omfattende porteføljen også vise frem de nye produktene.

Odd Tvedt & Co er nylig blitt utnevnt til norsk representant for L3 Electron Devices.

Electron Devices har sin opprinnelse i det velrennomerte Litton Industries, som senere ble kjøpt opp av GTE Sylvania Electron Tube. I 2002 havnet Electron Devices under L-3 Communications.

Electron Devices leverer traveling wave tubes (TWT), klystroner, thyratroner, magnetroner, cross field amplifiers og microwave power modules (MPM).

Kontakt oss gjerne pr. mail eller telefon for mer informasjon om utstyr fra L3 Electron Devices.